Tire eating is a headache that card friends often encounter. Tire eating can be caused by excessive or too small inflation, inaccurate front wheel alignment, and non parallelism of front and rear axles. Next, Xiaobian has sorted out [15 tips for solving tire eating], 15 tire eating cases, hoping to help you tire eating.
Tire eating: abnormal wear on both sides of the tread of a single of tire eating.
Solution: check whether the tire pressure is too low or whether there is a problem with the tire quality of tire eating.
Tire eating: abnormal wear in the middle of each tire tread.
Solution: check whether there is tire quality problem or whether the tire pressure is too high of tire eating.
Tire eating phenomenon: the tread of steering axle tire is worn in “s” shape.
Solution: check whether the toe in, steel ring, steering ball joint and steering gear are loose of tire eating.
Tire eating phenomenon: the tread of rear wheel tire is in “s” shape, which is abnormally worn of tire eating.
Solution: check whether the steel ring, hub screw and shaft head are loose of tire eating.
Tire eating phenomenon: abnormal wear at one part of the tire tread.
Solution: check whether the brake hub is out of round of tire eating.
Tire eating phenomenon: the inner edges of two tires on the same axis are abnormally worn of tire eating.
Solution: check the toe in and steering knuckle kingpin for problems of tire eating.
Tire eating phenomenon: two tires on the same axis are abnormally worn outside of tire eating.
Solution: check whether the toe in size is correct of tire eating.
Tire eating: the inner edge of one side of the steering axle is abnormally worn.
Solution: check the steering knuckle kingpin of tire eating.
Tire eating: abnormal wear on the outer edge of one side tire of steering axle of tire eating.
Solution: check whether the front axle and steering knuckle kingpin are deformed of tire eating.
Tire eating: the inner edge of the tire on one side of the rear axle of the vehicle is abnormally worn of tire eating.
Solution: check whether the hub bearing clearance is too large, whether the hub and bearing housing are loose (walking on the outer ring), and whether the half shaft guide pipe is bent upward and deformed of tire eating.
Tire eating: abnormal wear on the outside of the tire on the rear axle side of the vehicle of tire eating.
Solution: check whether the steel plate center screw, steel plate pin bushing and steel plate lifting lug are loose of tire eating.
Tire eating: abnormal wear on the inner side of a single tire on the steering axle of dual front axle vehicles of tire eating.
Solution: check whether the steering knuckle kingpin, hub bearing and ball joint of tire eating bridge are loose and whether the toe in is too large of tire eating.
Tire eating: abnormal wear on the outside of a single tire on the steering axle of dual front axle vehicles.
Solution: check whether the toe in of tire eating axle is too small, and whether the steering knuckle kingpin and axle are deformed.
Tire eating: abnormal wear on the inner side of one axle tire and the outer side of one axle tire on the steering axle of double front axle vehicles.
Solution: check the steering synchronization and the suspension positioning of the axle.
Tire eating phenomenon: the inner edges of tires on both axles of double front axle vehicles are abnormally worn.
Solution: check whether the front axle and steering knuckle kingpin are deformed.
The problem of tire eating is accompanied by almost every card friend. We must learn to take preventive measures and do a good job in daily tire maintenance and inspection in order to fundamentally solve the problem of tire eating.
