The Wheels 1
sinotruk howo logo
The High Water Temperature Of The Engine Is Actually Because The “Nose” Is Cracked!
2022-01-25
Careless Maintenance May Cost You Dearly
2022-01-25

What If The Wheels Of The Truck Can'T Return To Alignment Automatically After Turning?

The automobile wheels can automatically return to the right after steering, mainly because the steering wheel positioning plays a role, in which the kingpin tilt back and kingpin tilt in play a decisive role in the automatic return of the steering wheel.

What If The Wheels Of The Truck Can'T Return To Alignment Automatically After Turning

The Steering The Wheels Of Alignment Is Working

  • The righting effect of kingpin tilt back is related to vehicle speed, while the righting effect of kingpin tilt in is almost independent of vehicle speed. Therefore, when the vehicle is driving at high speed, the backward tilt has a great effect on the righting, while when driving at low speed, it mainly depends on the inward tilt.
  • In addition, when the steering wheel occasionally deflects due to impact when driving in a straight line, it mainly relies on the inward inclination of the kingpin to play a positive role of the wheels.
  • Knowing this principle, let’s analyze the reason why the steering wheel of Isuzu truck will not return to the right by itself. To be sure, there is something wrong with the steering wheel alignment of this car.
  • So what factors will change the steering wheel alignment? The common faults are the damage of the plane bearing of the steering knuckle pin, the excessive wear of the steering knuckle pin sleeve (that is, the commonly known “vertical shaft” is broken), the looseness or damage of the steering wheel bearing, the deformation of the steering knuckle, etc.
  • In addition, the broken front bow piece, the broken central screw, the loose riding bolt and the broken bow shaft will lead to the serial position of the front axle and the positioning of the whole steering wheel will be changed, so it will not be able to return to the right automatically. These faults need disassembly and maintenance of the wheels
  • Another possibility is that the bearings, sleeves and steering ball joints of the steering knuckle pin are poorly lubricated, resulting in excessive resistance to steering wheel alignment, which will also lead to the failure of automatic steering wheel alignment. At this time, just lubricate these parts. It should be noted that when filling these parts with butter, support the wheels, otherwise the butter will not go in of the wheels
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
We are Heavy Truck Parts Store. Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us! Please leave your phone or what'sApp
:
:
This chat session has ended

ONLINE MESSAGE

Send your inquiry / assessment to Us.  Anything need us ,please don’t hesitate contact us here! we will keep it secret for you !