A card friend told me that the mirror on the right side of his car shook badly, which seriously affected driving safety. Let’s diagnose what caused the mirror to shake.
After inspection, we found that the mirror was loose due to the broken bolt at the upper end of the mirror, so it would shake very badly.
It shakes seriously. It turns out that there is a problem here. Now that you know the problem, you need to find a solution. After the reflector is separated from the upper support, it is obvious that the bolt is embedded in it. So it is impossible to simply replace a bolt to solve the problem
It shakes seriously. It turned out that there was a problem here
So we decided to cut off the bolt, punch a hole directly, and then fix it with ordinary bolts.
Step 1: cut the old bolt.
It shakes seriously. It turned out that there was a problem here.
Step 2: use a fine drill to find the middle position, and then get through. Play a positioning role
It shakes seriously. It turned out that there was a problem here
Step 3: drill through with a bench drill.
The mirror shakes seriously. It turned out that there was a problem here
After the above steps, the screw hole is drilled. Let’s see the effect.
The mirror shakes seriously. It turned out that there was a problem here
Then install the upper end of the reflector directly onto the reflector with a bolt. (although not very beautiful, it must be said to be very practical!)
It shakes seriously. It turned out that there was a problem here
Finally, the reflector is installed on the car. Although there are defects, it will not affect the use.
The mirror shakes seriously. It turned out that there was a problem here
Many things don’t have to be replaced when they are broken. Maybe using your brain can save a lot of money and improve the transportation efficiency of trucks.