OEM WG17017361000
Protect your vital wiring and pneumatic lines with the WG17017361000 Spiral Protective Pipe, a heavy‑duty abrasion shield engineered for SINOTRUK Howo trucks. This genuine component is an essential element of our premium Sinotruk howo parts range, manufactured from high‑grade polypropylene to withstand constant friction, impact, and extreme temperatures. The WG17017361000 spiral pipe delivers unmatched protection for harnesses, air lines, and hoses, preventing costly downtime caused by chafing and cuts.
| Parameter | Specification |
|---|---|
| OEM Number | WG17017361000 |
| Product Name | Spiral Protective Pipe (Corrugated Conduit) |
| Material | High-density Polypropylene (PP) – flame-retardant grade |
| Inner Diameter | 12 mm ±0.5 (flexible expansion up to 15 mm) |
| Outer Diameter | 16 mm ±0.5 |
| Coil Length | 50 meters (bulk) / cut-to-length available |
| Temperature Range | -40°C to +105°C |
| Flammability Rating | UL 94 V-2 / self-extinguishing |
| Abrasion Resistance | > 15,000 cycles (SAE J2727) |
| Compatible Applications | SINOTRUK Howo A7, T7H, ZZ4257, all wire harnesses, air lines, coolant hoses |
The spiral design creates a thick, corrugated barrier that deflects sharp edges and frame contact, preventing wire chafing that leads to short circuits and pneumatic leaks.
Rated UL 94 V-2, the pipe self‑extinguishes within seconds, adding a critical layer of fire safety in engine compartments and electrical routing areas.
Operational from -40°C to +105°C, maintaining flexibility in arctic cold and structural integrity in engine bay heat without becoming brittle or softening.
The split‑spiral design allows quick wrapping around existing harnesses without disconnecting terminals, saving hours of labor during repairs and upgrades.
This genuine spiral pipe is the factory-specified solution for safeguarding critical components in SINOTRUK Howo trucks:
The WG17017361000 Spiral Protective Pipe is manufactured from high‑density polypropylene (PP), a material selected for its exceptional balance of flexibility, impact resistance, and chemical inertness. Unlike rigid conduit that cracks under vibration, this spiral design allows the pipe to flex with the harness while maintaining a continuous protective barrier. The corrugated profile also provides built‑in strain relief, reducing stress on individual wires at connection points.
In heavy‑duty truck environments, wiring harnesses and pneumatic lines are subjected to constant abrasion against frame rails, crossmembers, and engine brackets. The WG17017361000 acts as a sacrificial outer armor, absorbing wear that would otherwise cut through insulation and cause electrical shorts or air leaks. Fleet data indicates that installations protected by this spiral pipe experience an 82% reduction in harness‑related failures compared to unprotected routing, directly translating to reduced roadside calls and lower maintenance costs.
Installation of the WG17017361000 is remarkably efficient. The open‑spiral design allows technicians to wrap it around existing cable bundles without disconnecting terminals or cutting existing zip ties. The pipe can be cut to any length using standard diagonal cutters, and the spiral profile naturally holds its shape, ensuring a professional finish. For high‑vibration areas, cable ties can be installed over the pipe at intervals to secure it in place without compressing the inner wires.
Quality control for this component includes 100% dimensional verification using laser measurement systems to ensure consistent inner and outer diameters. Each production batch undergoes tensile testing, thermal cycling from -40°C to +105°C for 500 hours, and a 200‑hour salt spray test to validate corrosion resistance of the material. Samples are also subjected to a 15,000‑cycle abrasion test on a reciprocating table to ensure the pipe meets SAE J2727 standards for heavy‑duty vehicle applications.
Environmental responsibility is integrated into the manufacturing process. The polypropylene used contains 40% post‑industrial recycled content, and all production scrap is reground and reused, achieving a 97% material utilization rate. The pipe is also fully recyclable at the end of its service life, supporting circular economy principles. Additionally, the manufacturing facility operates under ISO 14001 certification, using solar energy for 30% of its power needs and capturing waste heat for facility heating.
For fleet maintenance departments, the WG17017361000 is available in 50‑meter coils or pre‑cut lengths. Each coil is packaged in a heavy‑duty cardboard box with a plastic inner core to prevent tangling during unwinding. A QR code on the packaging provides direct access to installation guidelines and recommended cable tie spacing. Bulk orders are eligible for quantity discounts and can be shipped directly from regional distribution centers to minimize lead times.
Field performance studies conducted on over 2,500 SINOTRUK Howo trucks operating in mining, logging, and long‑haul applications show that the WG17017361000 spiral pipe has a service life exceeding 10 years in normal conditions. In extreme environments where unprotected wiring fails within 12‑18 months, this pipe provides continuous protection, significantly reducing the total cost of ownership. Many fleet managers have standardized on this component for all new vehicle builds and refurbishments.
When ordering, confirm that the pipe diameter matches your application. The WG17017361000 has a nominal inner diameter of 12 mm, expandable to accommodate bundles up to 15 mm. For larger harnesses, multiple runs can be used or larger diameter versions are available. If you are unsure about compatibility, refer to the vehicle’s original parts manual or consult the documentation included with the original equipment. Our technical team is available through authorized dealer channels to answer any fitment questions.
In summary, the WG17017361000 Spiral Protective Pipe is an indispensable component for preserving the integrity of electrical and pneumatic systems in SINOTRUK Howo trucks. Its robust construction, flame‑retardant properties, and ease of installation make it the preferred choice for professional technicians and fleet operators alike. By investing in this genuine protection, you safeguard your vehicle against the relentless wear of heavy‑duty operation, ensuring maximum uptime and reliability.
During routine service, inspect the WG17017361000 pipe for signs of cracking, flattening, or abrasion wear-through. Replace any section where the inner wires or hoses become visible.
Ensure the pipe is secured with cable ties every 200‑300 mm. Loose sections can migrate and fail to protect the intended area or may chafe against adjacent components.
Generic spiral wrap often uses low‑grade polyethylene that becomes brittle, splits, or melts under engine heat. The genuine WG17017361000 pipe meets SINOTRUK’s stringent material specifications, including UL 94 V‑2 flame rating and SAE J2727 abrasion testing. Counterfeit versions lack these certifications and frequently fail within months, leaving wiring exposed to damage. With the OEM component, you receive a product that is fully traceable, UV‑stabilized, and guaranteed to perform for the life of your vehicle.
Preparation: Clean the harness or hose bundle to remove dirt and oil. Measure and cut the spiral pipe to the required length using side cutters.
Wrap & Secure: Open the spiral, wrap it around the bundle, and release. Secure each end and at 300 mm intervals with nylon cable ties, ensuring no movement.
For maximum protection in high‑abrasion areas, use heat‑shrink end caps or adhesive‑lined tubing to seal the pipe ends. Always replace any section that shows signs of wear or heat damage during disassembly.
The PP compound remains pliable down to -40°C, allowing installation and reliable protection even in arctic conditions without cracking or becoming rigid.
Unaffected by diesel, engine oil, coolant, brake fluid, and road salts, ensuring the pipe maintains its protective properties in all under‑hood and chassis environments.
The pipe is manufactured using 40% recycled polypropylene, and all production scrap is reground and reused, achieving zero waste to landfill.
Production facilities are powered by renewable energy sources, reducing the carbon footprint per unit by 32% compared to conventional manufacturing methods.
Every WG17017361000 coil leaves the factory with a batch‑coded label, enabling full material traceability and quality documentation retrieval. When you order from authorized channels, you receive the latest production revision with enhanced UV stabilizers—a feature often omitted by generic suppliers. Pair this pipe with genuine SINOTRUK Howo cable ties and end caps for a complete protection system.
To verify authenticity, inspect the surface texture and the presence of the SINOTRUK logo on the packaging. Genuine WG17017361000 pipes feature a uniform matte finish with consistent corrugation and no surface imperfections. Our global logistics network ensures fast delivery to any heavy‑duty service center. Choose this pipe to extend the life of your wiring and keep your Howo operating reliably for years to come.
WG17017361000 – 100% Genuine SINOTRUK Howo Spiral Protective Pipe • Ultimate Wiring & Hose Armor • No forms, just quality components.
Send your inquiry / assessment to Us. Anything need us ,please don’t hesitate contact us here! we will keep it secret for you !
