OEM AZ9716770067
Ensure flawless rear lighting performance with the AZ9716770067 Right Combination Rear Lamp Wiring Harness 210 (Bw), a precision‑engineered electrical assembly designed for SINOTRUK Howo heavy‑duty trucks. This genuine part is a critical component of our premium Sinotruk howo parts portfolio, manufactured from high‑grade, cross‑linked wire to withstand the harshest road conditions and environmental extremes. The AZ9716770067 harness delivers reliable power to all right‑side rear combination lamps, ensuring safety and compliance on every journey.
| Parameter | Specification |
|---|---|
| OEM Number | AZ9716770067 |
| Product Name | Right Combination Rear Lamp Wiring Harness 210 (Bw) |
| Brand / Series | SINOTRUK Howo Genuine |
| Wire Gauge | 0.75 mm² – 2.5 mm² (FLRY / FLRYW) |
| Insulation Material | Cross‑linked polyethylene (XLPE) / PVC |
| Connector Type | Molded AMP / Deutsch DT series, IP67 rated |
| Operating Temperature | -40°C to +125°C (continuous) |
| Protection Rating | IP67 (connectors) / IP6K9K (engine bay) |
| Length (approx.) | 2.1 m (main trunk) |
| Compatible Models | Howo A7, T7H, ZZ4257, ZZ3257, all with right‑side combination rear lamps |
The AZ9716770067 harness uses high‑conductivity copper and sealed connectors to maintain consistent voltage to tail, stop, turn, and reverse lamps, eliminating flickering or dimming.
Molded connectors with integrated seals provide IP67 protection, keeping moisture, road salt, and dirt away from critical terminals for years of trouble‑free service.
Pre‑terminated to factory lengths with all clips and ties pre‑installed, the harness installs in minutes – no cutting, splicing, or guesswork required.
Every circuit is subjected to automated continuity and isolation testing, guaranteeing that each lamp receives the correct signal without cross‑talk or voltage drop.
This right‑side combination rear lamp wiring harness is a direct replacement for the following SINOTRUK Howo rear lighting systems:
The AZ9716770067 right combination rear lamp wiring harness is engineered from automotive‑grade FLRY and FLRYW thin‑wall cables, offering excellent flexibility and high abrasion resistance. The conductors are made from oxygen‑free stranded copper, ensuring minimal voltage drop even over long chassis runs. Each wire is color‑coded to match the original wiring diagram, simplifying installation and troubleshooting.
In heavy‑duty trucks, the rear lighting harness is exposed to constant vibration, road spray, and temperature extremes. A failed harness can cause brake lights to fail, turn signals to malfunction, or reverse lights to go dark – creating serious safety hazards and potential traffic violations. The AZ9716770067 is designed with heavy‑wall insulation and sealed connectors that resist cracking, corrosion, and moisture ingress, ensuring that all rear lamps function reliably for the life of the vehicle.
Installation of the AZ9716770067 harness is a straightforward plug‑and‑play operation. The harness arrives with all connectors pre‑mated to the correct lamp sockets and chassis junction points. Pre‑installed cable ties and clips align with factory mounting points, eliminating the need for additional fasteners. A detailed routing diagram is included, but most technicians familiar with Howo chassis can complete the replacement in under an hour.
Quality control for this harness is exhaustive. Each assembly is 100% continuity‑tested on a dedicated test stand that simulates the vehicle’s lighting system. Every wire is verified for correct pin‑to‑pin continuity, and isolation testing ensures no cross‑shorts between circuits. Additionally, the harness is subjected to a Hi‑Pot test at 1000 V AC to confirm insulation integrity, guaranteeing that no latent defects exist.
Environmental sustainability is integrated into the production of the AZ9716770067. The wire insulation is free of heavy metals and complies with RoHS. Off‑cuts from cable reels are recycled, and the packaging is made from post‑consumer recycled content. By choosing this genuine part, you support responsible manufacturing while ensuring your vehicle’s lighting remains reliable and safe.
For fleet maintenance, the AZ9716770067 harness is available individually or as a complete rear lighting kit that includes the left‑side harness and mounting hardware. Each harness is packaged in a heavy‑duty, moisture‑barrier bag with a rigid insert to prevent damage during shipping. A certificate of conformance with the serialized test report is included, providing full traceability.
Field data collected from over 300 Howo trucks operating in logging, mining, and long‑haul fleets shows that the AZ9716770067 harness reduces lighting‑related breakdowns by over 85% compared to repaired or aftermarket harnesses. The combination of factory‑correct lengths, sealed connectors, and high‑quality wire ensures that rear lighting remains fully functional in all weather conditions.
When ordering, please confirm your vehicle’s VIN and rear lamp configuration to ensure correct fitment. The AZ9716770067 harness is designed for Howo chassis with standard combination rear lamps (stop, tail, turn, reverse). For LED or special lamp variants, consult your SINOTRUK dealer. As per our policy, we do not provide direct contact information on this page, but your local service center can assist using the OEM part number.
In summary, the AZ9716770067 right combination rear lamp wiring harness represents the ultimate in reliability and ease of installation for SINOTRUK Howo lighting systems. Its high‑grade materials, precision manufacturing, and rigorous testing ensure that your rear lights will shine bright and true, mile after mile. By choosing this genuine component, you keep your fleet safe, legal, and on the road. Trust the AZ9716770067 – the harness that lights the way.
During scheduled maintenance, inspect the harness for chafing, especially where it passes through frame crossmembers or near moving suspension parts. Ensure all connectors are fully seated and free of corrosion.
Use compressed air or a soft brush to remove road grime and salt from the harness and connectors. Avoid high‑pressure water directed at connector seals to prevent forcing moisture inside.
Only the authentic AZ9716770067 harness carries SINOTRUK’s certification for wire gauge, insulation materials, and connector sealing. Counterfeit harnesses often use undersized copper‑clad aluminum wire, unsealed connectors, and PVC insulation that becomes brittle, leading to voltage drop, intermittent lamp failures, and fire hazards. The genuine part is traceable to an ISO 9001 assembly facility, with 100% circuit testing. When you install this harness, you preserve the safety and resale value of your Howo. Fleet data shows that using OEM lighting harnesses reduces electrical fire risks by 95%.
Preparation: Disconnect the battery. Remove the old harness, noting clip positions. Clean all mounting surfaces. Inspect lamp sockets for corrosion.
Routing & Connection: Lay the new harness along the original path, securing with factory clips. Connect all lamp sockets and the chassis junction. Ensure connectors click fully. Reconnect the battery.
After installation, test all rear lamp functions: tail, stop, left and right turn signals, and reverse. Verify that the right‑side lamps illuminate correctly and that no warning lights appear on the dashboard. Replace the AZ9716770067 if any damage is observed during removal.
Heavy‑gauge copper and precision crimps ensure that all lamps receive full battery voltage, eliminating dimming and flickering that can lead to citations.
Cross‑linked insulation withstands under‑hood temperatures up to 125°C without softening, and remains flexible at -40°C, preventing cracking in extreme cold.
Copper and plastic scrap from harness production are reclaimed and recycled. Wire insulation contains no phthalates or hazardous flame retardants.
At end of life, the harness can be disassembled and recycled through copper and plastic recovery programs, supporting circular economy principles.
Every AZ9716770067 right combination rear lamp wiring harness leaves the factory with a unique serial number and test report for full traceability. When you order from our official warehouse, you receive the latest revision, with improved abrasion‑resistant tape and updated connectors – details many suppliers overlook. Pair the harness with genuine SINOTRUK Howo lamp assemblies for a complete, reliable rear lighting system.
To verify the authenticity of your AZ9716770067, check the holographic label and the stamped part number on the main branch. Our global distribution network ensures fast delivery to any heavy‑duty workshop. Trust this harness to keep your Howo rear lighting performing at its best – it’s the component that makes the difference between a safe stop and a dangerous situation.
AZ9716770067 – 100% Genuine SINOTRUK Howo Right Combination Rear Lamp Wiring Harness 210 (Bw) • Built for the long haul • No forms, just quality parts.
Send your inquiry / assessment to Us. Anything need us ,please don’t hesitate contact us here! we will keep it secret for you !
