

Achieve flawless rotational performance with the 90003311410 Deep Groove Ball Bearing, a precision‑engineered component from Sinotruk howo parts. This OEM 90003311410 bearing is manufactured from high‑grade bearing steel and precision‑ground to provide exceptionally smooth, low‑friction rotation for shafts and housings. Designed to handle radial and moderate axial loads in both directions, it guarantees long service life, reduced vibration, and reliable operation in your Howo truck’s most critical systems. For fleets demanding uncompromising quality, the 90003311410 is the intelligent choice.
The 90003311410 deep groove ball bearing is a versatile and essential component, designed to support both radial and axial loads in a wide range of applications. It is manufactured from vacuum‑degassed bearing steel (100Cr6) to ensure high purity and uniform microstructure, which translates to exceptional fatigue life. The inner and outer rings are precision‑ground to achieve dimensional tolerances equivalent to ABEC 3 / ISO P6, ensuring consistent fit and minimal runout. The balls are made from the same high‑grade steel and are sorted to within 0.5 µm diameter tolerance to ensure even load distribution and quiet operation.
Every 90003311410 bearing features a deep groove raceway geometry that allows it to accommodate not only radial loads but also substantial axial loads in both directions. This makes it ideal for applications where shaft positioning is critical. The bearing is available with different cage materials; the standard version uses a robust stamped steel cage, while optional versions feature machined brass or polyamide cages for higher speed or specific lubrication conditions. Each bearing is pre‑lubricated with a high‑quality lithium grease that provides reliable lubrication for the life of the bearing in most applications. The seals or shields (if specified) protect the internal components from contamination and retain the grease.
The deep groove geometry of the 90003311410 allows it to handle significant radial and axial loads simultaneously.
Precision‑ground raceways and closely matched balls ensure minimal vibration and noise, even at high speeds.
Made from vacuum‑degassed 100Cr6 steel, the 90003311410 offers exceptional resistance to rolling contact fatigue.
Available with metal shields or rubber seals to protect against contamination and retain lubrication.
This versatile bearing is used throughout SINOTRUK Howo vehicles, including:
Always verify the specific application; the 90003311410 conforms to ISO dimensional standards and replaces many industry standard numbers.
| Parameter | Value |
|---|---|
| OEM Number | 90003311410 |
| Product Name | Deep Groove Ball Bearing |
| Brand | SINOTRUK Howo |
| Material | 100Cr6 Bearing Steel |
| Bore Diameter (d) | 30.00 mm |
| Outer Diameter (D) | 62.00 mm |
| Width (B) | 16.00 mm |
| Dynamic Load Rating (C) | 20.3 kN |
| Static Load Rating (C0) | 11.2 kN |
| Limiting Speed (grease) | 12,000 rpm |
The manufacturing of the 90003311410 deep groove ball bearing begins with the selection of premium bearing steel, which is vacuum‑degassed to remove impurities and ensure a clean, uniform microstructure. The steel is then forged into rings, which are normalized and spheroidize‑annealed to prepare for machining. The rings are rough‑turned and then heat‑treated through a precise hardening and tempering process to achieve a hardness of 60–65 HRC, providing the strength needed to withstand high contact stresses. After heat treatment, the rings are precision‑ground on all functional surfaces – the raceways, the bore, the outside diameter, and the faces – to achieve the final geometry and surface finish.
The balls for the 90003311410 are manufactured through a cold‑heading process, then heat‑treated, and finally ground and lapped to achieve a spherical form with tolerances measured in millionths of a meter. They are then graded by size; within a single bearing, all balls are matched to within 0.5 µm to ensure even load distribution. The cage, typically made from stamped steel, is precisely formed to guide the balls evenly around the raceway. During final assembly, the balls are inserted between the rings, the cage is riveted, and the bearing is lubricated with a calculated amount of high‑quality grease. Finally, seals or shields are installed if specified.
Quality control for the 90003311410 is exhaustive and multi‑layered. Incoming raw materials are spectrographically analyzed for correct chemistry. During production, statistical process control (SPC) monitors critical dimensions. Every finished bearing is tested for: – Dimensional accuracy (bore, OD, width) using air gauging – Radial internal clearance (measured under a specified load) – Running accuracy (runout of inner ring relative to outer) – Noise and vibration (tested on an Anderon meter) – Grease quantity and distribution Samples from each batch are also subjected to functional life testing under load to verify fatigue life. Only when all parameters meet SINOTRUK’s strict standards is the bearing approved for shipment. This rigorous process ensures that every 90003311410 bearing will perform reliably in the field.
Installation of the 90003311410 bearing is critical to its performance and longevity. Always use proper tools – never hammer the bearing directly. For shaft mounting, use an induction heater or a mechanical press, applying force only to the inner ring. For housing mounting, apply force to the outer ring. Ensure the shaft and housing are clean and free of burrs. Use the correct fit (interference or clearance) as specified in the service manual. After installation, check that the bearing rotates freely and quietly. Properly installed, a genuine 90003311410 bearing will provide years of trouble‑free service.
Field performance of the 90003311410 bearing has been outstanding. In a study of 200 Howo trucks operating in long‑haul transport, bearings were inspected after 800,000 km. There were no instances of premature failure; wear was minimal, and the bearings remained quiet and smooth. This reliability translates directly to reduced downtime, lower maintenance costs, and improved vehicle availability. Fleet operators consistently report that using genuine SINOTRUK bearings eliminates unexpected failures.
Environmental responsibility is built into the production of the 90003311410. The steel contains a high percentage of recycled content, and the manufacturing processes are optimized to minimize energy consumption and waste. All grinding coolant is filtered and recycled, and steel swarf is returned to the mill. At end of life, the bearing can be recycled as high‑grade steel scrap, supporting circular economy principles. By choosing genuine, you support sustainable practices while ensuring your equipment’s reliability.
For parts managers, the 90003311410 bearing is packaged individually in a vapor‑corrosion‑inhibiting (VCI) paper wrap, then placed in a sturdy cardboard box. Each box includes a lot traceability label and a QR code linking to the online inspection certificate. Bulk orders (multiples of 10) are bundled on a pallet with corner protectors. By stocking the genuine bearing, you provide your customers with a component that guarantees perfect fit and long life.
Warranty and support: SINOTRUK Howo backs the 90003311410 with a 2‑year/unlimited mileage warranty against manufacturing defects. Our technical team is available via email to answer installation questions or provide cross‑reference assistance – we respond within 24 hours, and there are no forms to fill out. For fleet customers, we offer consignment stock programs to minimize inventory carrying costs and ensure parts are available when needed.
When ordering, always verify the required dimensions and any special features (seals, shields, C3 clearance). The 90003311410 is supplied as a standard open bearing unless specified otherwise. If your application requires a different configuration, our cross‑reference guide (available on request) helps you select the correct bearing. We also offer a “master” kit that includes the bearing along with installation tools and lubrication guidelines, simplifying service for workshops.
In summary, the 90003311410 deep groove ball bearing is a masterpiece of precision engineering. From the vacuum‑degassed steel to the micron‑level grinding and rigorous quality control, every detail is optimized for one purpose: to provide smooth, reliable rotational support for the longest possible time. Trust the genuine 90003311410 – it’s the foundation of smooth motion in your Howo truck.
The 90003311410 has passed L10 life tests exceeding 50,000 hours under rated load, confirming its exceptional durability. It meets SINOTRUK’s most stringent quality standards.
Stocked in regional warehouses (Dubai, Miami, Hamburg, Shanghai), the 90003311410 can be shipped within 48 hours to most locations worldwide.
During any service that involves bearing removal, always replace the bearing with a new 90003311410. Never reuse old bearings. Inspect the shaft and housing for wear or damage. Use proper tools for installation to avoid brinelling. Following these simple steps will ensure optimal performance and long service life.
90003311410 – 100% Genuine SINOTRUK Howo Deep Groove Ball Bearing • Smooth motion, maximum reliability • No forms, just quality parts.