It’s more difficult to use the automatic gear for maintenance than the other cars, so it’s more difficult to use the automatic gear for maintenance.
The inspection method of automatic transmission oil is different from that of engine oil. The engine oil shall be inspected when the engine oil is cold, and the transmission oil shall be preheated to about 50 ℃, and then the gear lever shall be placed in the parking gear after staying in each gear for 2 seconds.
At this time, the normal oil level of the dipstick shall be between the highest and lowest lines. If it is not enough, oil of the same quality shall be added in time.
At present, the better oil change method is dynamic oil change. Special gearbox cleaning equipment is adopted.
During the operation of the gearbox, the old oil is fully circulated, and new gearbox oil is added after being discharged, so that the oil change rate can reach more than 90 and ensure good oil change effect.
The internal control mechanism of automatic transmission is very precise and the fit clearance is small, so most manufacturers recommend that the oil change cycle of automatic transmission is generally two years or 40000 ~ 60000 km.
In the process of normal use, the working temperature of transmission oil is generally about 120 ℃, so the quality of oil is very high and must be kept clean.
Secondly, the transmission oil will produce oil dirt after a long service time, which may form oil sludge, increase the wear of friction plates and components, and also affect the system oil pressure and power transmission.
Third, the sludge in the dirty oil will make the movement of the valve body in each valve body blocked, and the oil pressure control will be affected, so that the automatic transmission will be abnormal.
Send your inquiry / assessment to Us. Anything need us ,please don’t hesitate contact us here! we will keep it secret for you !
