How to solve the problem of light failure in the T7H vehicle of Sinotruk?
How to choose the right power take-off for your application
2021-04-06
engine
How to extend the life of the engine, pay attention to when starting
2021-04-08

How to solve the problem of light failure in the T7H vehicle of Sinotruk?

When Sinotruk’s T7H vehicle has a light failure failure,

■ The cause of the failure:

The left combination handle harness is off-line

The light switch harness is off-line

Circuit fuse blown
Sinotruk’s T7H vehicle

■ Tools for maintenance:

Special opening tool for multimeter and instrument panel

■ Failure inspection process:

  1. Check whether the pin voltage of each gear of the light switch is normal;
  2. Check whether the voltage of the low beam lamp of the combination switch is normal;
  3. Check whether the ground wire of the headlight harness is tight;
  4. Check whether the R106 and 120 resistors are properly assembled;

Note: Turn on the corresponding light position during measurement, and pay attention to avoid scratches when turning on the instrument panel.

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
We are CNHTC. Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us! Please leave your phone or what'sApp
:
:
This chat session has ended